Cortec-Middle-East-logo-notaglineCortec-Middle-East-logo-notaglineCortec-Middle-East-logo-notaglineCortec-Middle-East-logo-notagline
  • ABOUT US
    • VpCI® Technology
    • MCI® Technology
    • The Cortec® Story
    • Engineering and Field Service
    • Cortec® R&D
    • Asset Integrity Assurance
  • INDUSTRIES
    • Oil & Gas
      • Aboveground Storage Tanks
      • Equipment Preservation
      • Hydrotesting and Mothballing
      • Mothballing
      • Cased Pipeline Crossings
      • Rig Stacking
    • Manufacturing Industries
    • Construction
      • Reinforced Concrete Structures
      • Post-Tensioned Structures
      • Concrete Repair
    • Power & Water
      • Above-ground Storage Tanks
      • Equipment Preservation
      • Hydrotesting and Mothballing
      • Mothballing
      • Cased Pipeline Crossings
    • Aviation
  • PRODUCTS
    • All Purpose Lubricant
    • Surface Preparation
    • Rust Preventives
    • VpCI® Powder
    • VpCI® Additives
    • VpCI® Packaging
    • VpCI® Emitters
    • MCI® for Concrete
  • CONTACT US
Home  »  case studies • Manufacturing Industries   »   PRESERVATION OF CRUDE OIL AND GAS MODULES
Published by Cortec Middle East on December 11, 2019
Categories
  • case studies
  • Manufacturing Industries
Tags
Offshore Platform Preservation

PRESERVATION OF CRUDE OIL AND GAS MODULES

Piping Internal Preservation for the UZ-750 Offshore Project

Challenge

Piping internal preservation was essential for Preassembled Racks (PARs) and Preassembled Modules (PAMs) prepared for the UZ-750 project in the UAE.

The company fabricated the modules onshore and then transported them to the Zakum Islands for final fit-up. Because the project required a preservation period of up to two years, the internal surfaces of the piping systems needed reliable protection throughout storage, transportation, and installation.

Furthermore, the piping systems contained different types of metals. Therefore, the preservation program needed suitable products for both carbon steel systems and systems containing yellow metals.

Why Piping Internal Preservation Is Important

Large offshore projects often fabricate modules onshore before transporting them to their final installation location. During this period, piping systems can remain inactive for long periods.

As a result, the internal metal surfaces require protection throughout the preservation period. The harsh climatic conditions of the Arabian Peninsula added to the project’s preservation requirements.

Moreover, different metallurgy required different preservation products. Therefore, the project team needed to select the appropriate VpCI® treatment for each piping system.

Application

The project team selected Cortec® VpCI® technology for the piping preservation program.

For carbon steel (CS) and low-temperature carbon steel (LTCS) systems, the team fogged VpCI®-609 into the piping internals.

However, systems containing yellow metals required a different treatment. Therefore, the team fogged VpCI®-337 into these systems.

This targeted approach allowed the preservation program to address the different piping materials while supporting the required preservation period of up to two years.

Piping Internal Preservation with VpCI® Technology

The project required a practical method for protecting internal piping surfaces before the modules reached their final installation stage.

Instead of applying the same product throughout every piping system, the team matched each VpCI® product to the system metallurgy.

For CS and LTCS systems, VpCI®-609 provided the selected preservation treatment. Meanwhile, the team used VpCI®-337 in systems containing yellow metals.

Consequently, the piping internal preservation strategy addressed the different material requirements across the PARs and PAMs.

Why VpCI®-609 and VpCI®-337 Were Selected

VpCI®-609 for CS and LTCS Systems
The project team selected VpCI®-609 for carbon steel and low-temperature carbon steel piping. They applied the product by fogging it into the piping systems.

VpCI®-337 for Systems Containing Yellow Metals
The team selected VpCI®-337 for systems that contained yellow metals. They also applied this product by fogging it into the relevant systems.

Protection for an Extended Project Schedule
The modules required preservation for up to two years. Therefore, the preservation plan needed to protect piping internals throughout the extended project period.

Application Across Preassembled Modules
The products supported the preservation requirements of both Preassembled Racks and Preassembled Modules before final offshore fit-up.

Benefits of Piping Internal Preservation

A planned piping internal preservation program helps protect valuable piping systems while modules remain inactive before final installation.

In this project, the preservation strategy accounted for different types of piping metallurgy. Furthermore, the use of separate VpCI® products allowed the team to treat CS and LTCS systems differently from systems containing yellow metals.

As a result, the company achieved effective preservation for piping internals during an extended offshore construction schedule.

Conclusion

Cortec® and The Kanoo Group supported the company in protecting piping internals for the UZ-750 project.

The project team used VpCI®-609 for CS and LTCS systems and VpCI®-337 for systems containing yellow metals. This approach provided a targeted piping internal preservation strategy for the project’s PARs and PAMs.

Ultimately, the preservation program helped the company protect piping systems for up to two years under the harsh climatic conditions found in the Arabian Peninsula.

Why This Case Matters for Offshore Projects

  • Offshore modules may require long preservation periods before final installation.
  • PARs and PAMs can require internal piping protection during storage and transportation.
  • Different piping materials may require different preservation products.
  • The team selected VpCI®-609 for CS and LTCS systems.
  • The team selected VpCI®-337 for systems containing yellow metals.
  • Fogging provided the chosen application method for both products.
  • The preservation requirement extended for up to two years.
  • A system-specific approach helped meet the project’s offshore preservation requirements.

Frequently Asked Questions

What is piping internal preservation?
Piping internal preservation protects the inside surfaces of piping systems during periods when the systems remain inactive before installation or operation.

Why did the UZ-750 project require piping preservation?
The company fabricated the PARs and PAMs onshore before transporting them to the Zakum Islands for final fit-up. The project required preservation for up to two years.

Which product was used for carbon steel piping?
The project team fogged VpCI®-609 into carbon steel and low-temperature carbon steel systems.

Which product was used for systems containing yellow metals?
The team used VpCI®-337 in piping systems containing yellow metals.

How were the VpCI® products applied?
The team applied both products by fogging them into the relevant piping systems.

How long did the piping require preservation?
The project required a preservation period of up to two years.

Key Takeaways

  • The project required piping internal preservation for PARs and PAMs.
  • The company fabricated the modules onshore.
  • The modules then traveled to the Zakum Islands for final fit-up.
  • The required preservation period extended up to two years.
  • VpCI®-609 was fogged into CS and LTCS piping systems.
  • VpCI®-337 was fogged into systems containing yellow metals.
  • Cortec® and The Kanoo Group supported the preservation project.

Distributor

The Kanoo Group

Cortec® Products Used

  • VpCI®-609 / VpCI®-609S
  • VpCI®-337
Contact Us
Share
0
Cortec Middle East

Related posts

High Rise Building Restoration

High Rise Building Restoration

September 23, 2025

High Rise Building Restoration


Read more
Protection of Electrical Cabinets

Protection of Electrical Cabinets

September 23, 2025

Protection of Electrical Cabinets


Read more
Cleaning and Preservation of Spare Parts

Cleaning and Preservation of Spare Parts

August 24, 2025

Cleaning and Preservation of Spare Parts


Read more

Comments are closed.

Cortec Middle East-logo

QUICK LINKS

  • → HOME
  • → ABOUT US
  • → INDUSTRIES
  • → PRODUCTS
  • → CAREER
  • → CONTACT US
  • → PRIVACY
  • → MEDIA

REQUEST A WEBINAR

REQUEST NOW

SOCIAL MEDIA

ADDRESS

CORTEC® MIDDLE EAST,
2411 Tower B, Jafza One,
Jebel Ali Freezone, DUBAI,
UNITED ARAB EMIRATES


TEL. +971 4 434 0669
FAX. +971 4 434 0668
INQUIRIES@CORTEC-ME.COM

Copyright Cortec® Middle East.
All rights reserved. Cortec®, MCI®, VpCI® 126-Blue®, EcoFilm®, EcoWorks®, Rawn® and Bull Frog® are registered trademarks of Cortec® Corporation.
    • No translations available for this page

      REQUEST A FREE SAMPLE



        Download Layup Manuals

          Select Manual* :


          Offshore Rig Layup PR




            Layup of Land Based Drilling Rigs PR




              Request a Quote


                Talk To Our Experts


                  Subscribe Now

                    Apply Now

                      Upload Your CV