Cortec-Middle-East-logo-notaglineCortec-Middle-East-logo-notaglineCortec-Middle-East-logo-notaglineCortec-Middle-East-logo-notagline
  • ABOUT US
    • VpCI® Technology
    • MCI® Technology
    • The Cortec® Story
    • Engineering and Field Service
    • Cortec® R&D
    • Asset Integrity Assurance
  • INDUSTRIES
    • Oil & Gas
      • Aboveground Storage Tanks
      • Equipment Preservation
      • Hydrotesting and Mothballing
      • Mothballing
      • Cased Pipeline Crossings
      • Rig Stacking
    • Manufacturing Industries
    • Construction
      • Reinforced Concrete Structures
      • Post-Tensioned Structures
      • Concrete Repair
    • Power & Water
      • Above-ground Storage Tanks
      • Equipment Preservation
      • Hydrotesting and Mothballing
      • Mothballing
      • Cased Pipeline Crossings
    • Aviation
  • PRODUCTS
    • All Purpose Lubricant
    • Surface Preparation
    • Rust Preventives
    • VpCI® Powder
    • VpCI® Additives
    • VpCI® Packaging
    • VpCI® Emitters
    • MCI® for Concrete
  • CONTACT US
Home  »  case studies   »   Gas and Oil Equipment Protection
Published by Cortec Middle East on April 19, 2022
Categories
  • case studies
Tags
Gas and Oil Equipment Protection

Gas and Oil Equipment Protection

Protecting Oil & Gas Equipment Across Varied Climates with VpCI®-307 and VpCI®-309

Problem

Santos, a major Australian oil and gas producer, faced corrosion problems during equipment lay-up. This equipment had to sit in storage across hot, humid, and cold environments, each presenting its own set of corrosion risks.

Background: Why Varied Storage Climates Make Corrosion Protection More Difficult

Large oil and gas operators like Santos rarely store equipment in a single, predictable environment. Depending on the site, equipment might sit in intense desert heat, coastal humidity, or cold storage conditions, sometimes all within the same company’s operations.

This variability creates a genuine challenge for corrosion protection. A product that performs well in dry heat might struggle in high humidity, and a solution suited to cold storage may not hold up in a hot, humid climate. For operators managing equipment across multiple sites and conditions, finding one reliable protection method that works everywhere becomes essential, rather than juggling different products for different locations.

Equipment type adds another layer of complexity. Heat exchangers, large vessels, piping, and shipping containers all have different internal geometries and access points. A protection method also needs to reach these different spaces effectively, regardless of shape or size.

Application

Santos tested Cortec® VpCI®-307 and VpCI®-309 powders for corrosion protection across its equipment lay-up program. The team blew these powders into heat exchangers, large vessels, piping, and metal shipping containers holding various types of parts. This application method let the powders reach complex internal spaces throughout each piece of equipment.

Why VpCI®-307 and VpCI®-309 Worked for This Application

They perform across varied climates. The powders protected equipment reliably whether it sat in hot, humid, or cold storage conditions.

They reach complex internal geometries. Blowing the powder into heat exchangers, vessels, and piping allowed protection to spread throughout spaces that would be difficult to coat with liquid products.

They cover a wide range of equipment types. From large vessels to shipping containers, the same powder-based system adapted to very different equipment categories.

They offered a solution competitors couldn’t match. No other supplier could provide an equally effective system covering this much variety in equipment type and storage environment.

Conclusion

Santos chose Cortec® for corrosion protection because no competitor could offer an equally effective protection system covering so many different types of equipment. This breadth of coverage, combined with reliable performance across hot, humid, and cold storage conditions, made VpCI®-307 and VpCI®-309 the clear choice for Santos’s lay-up program.

Why This Case Matters for Oil & Gas Operators Managing Diverse Equipment

This project shows how a single powder-based protection system can handle both varied climates and varied equipment types at once. For oil and gas operators managing equipment lay-up across multiple sites, this case offers several practical lessons:

  • One system can replace several specialized products — VpCI®-307 and VpCI®-309 covered equipment across hot, humid, and cold environments without requiring separate solutions for each.
  • Powder application reaches complex geometries — blowing powder into heat exchangers, vessels, and piping protected internal spaces that liquid treatments might miss.
  • Breadth of coverage simplifies vendor management — a single supplier covering diverse equipment types reduces the complexity of managing multiple corrosion protection vendors.
  • Proven performance across conditions builds trust — reliable results in varied climates gave Santos confidence in adopting the system broadly.

Frequently Asked Questions

How do you protect oil and gas equipment during lay-up in different climates?
Use a vapor phase corrosion inhibitor powder, such as VpCI®-307 or VpCI®-309, blown into the equipment. These products perform reliably across hot, humid, and cold storage environments.

Can the same corrosion protection method work on heat exchangers, vessels, and piping?
Yes. In this case, Santos used the same powder-based system across heat exchangers, large vessels, piping, and metal shipping containers.

Why did Santos choose Cortec® over other suppliers?
No other competitor could offer an equally effective protection system covering as many different types of equipment and storage conditions.

Who represented Cortec® for this application in Australia?
Wilson Walton Intl. served as the Cortec® representative for this project.

Key Takeaways

  • Santos faced corrosion problems storing oil and gas equipment across hot, humid, and cold environments.
  • VpCI®-307 and VpCI®-309 powders protected equipment by being blown into heat exchangers, vessels, piping, and shipping containers.
  • The powders performed reliably across varied climate conditions.
  • Santos selected Cortec® because no competitor offered equally broad equipment coverage.
  • Wilson Walton Intl. represented Cortec® for this project in Australia.

Cortec Products Used

  • VpCI®-307
  • VpCI®-309
Contact Us
Share
6
Cortec Middle East

Related posts

High Rise Building Restoration

High Rise Building Restoration

September 23, 2025

High Rise Building Restoration


Read more
Protection of Electrical Cabinets

Protection of Electrical Cabinets

September 23, 2025

Protection of Electrical Cabinets


Read more
Cleaning and Preservation of Spare Parts

Cleaning and Preservation of Spare Parts

August 24, 2025

Cleaning and Preservation of Spare Parts


Read more

Comments are closed.

Cortec Middle East-logo

QUICK LINKS

  • → HOME
  • → ABOUT US
  • → INDUSTRIES
  • → PRODUCTS
  • → CAREER
  • → CONTACT US
  • → PRIVACY
  • → MEDIA

REQUEST A WEBINAR

REQUEST NOW

SOCIAL MEDIA

ADDRESS

CORTEC® MIDDLE EAST,
2411 Tower B, Jafza One,
Jebel Ali Freezone, DUBAI,
UNITED ARAB EMIRATES


TEL. +971 4 434 0669
FAX. +971 4 434 0668
INQUIRIES@CORTEC-ME.COM

Copyright Cortec® Middle East.
All rights reserved. Cortec®, MCI®, VpCI® 126-Blue®, EcoFilm®, EcoWorks®, Rawn® and Bull Frog® are registered trademarks of Cortec® Corporation.
    • No translations available for this page

      REQUEST A FREE SAMPLE



        Download Layup Manuals

          Select Manual* :


          Offshore Rig Layup PR




            Layup of Land Based Drilling Rigs PR




              Request a Quote


                Talk To Our Experts


                  Subscribe Now

                    Apply Now

                      Upload Your CV