September 18, 2023
PROBLEM An aftermarket remanufacturer of automotive generators, motors, starters, etc., was in search of a water-based coating to replace the solvent-based coatings that they had used […]
August 16, 2023
PROBLEM The customer needed an outdoor inhibitor that was easy to remove and would withstand mechanical damage from rain, ice, snow, sand, etc. Lab and field […]
July 20, 2023
PROBLEM Customer was using a Becker solvent-based paint system or nothing at all to protect their steel sheeting. They wanted a more effective solution that was […]
July 20, 2023
PROBLEM The customer was having problems with shaft corrosion between processing stations. APPLICATION Approximately 200 shafts at the time were are placed in a circular wire […]
June 21, 2023
PROBLEM The customer previously used solvents or alkaline washing agents to protect steel during export shipment. APPLICATION Cortec® VpCI®-369 was sprayed on the edges of cut […]
June 16, 2023
PROBLEM Customer needed corrosion protection for indoor/outdoor protection of metal components (shafts, bearings, castings for cranes, and derricks). Also needed assistance in selection of application method […]
April 18, 2023
PROBLEM The customer needed a convenient method of protection for steel and aluminum coils and stacks without rewinding. Sometimes edges were in direct contact with wood […]
April 18, 2023
PROBLEM The customer wanted to replace a low flash point oil with a safer material that would offer a better vapor and contact inhibitor. Protection was […]
March 7, 2023
PROBLEM The customer was previously using ordinary oil for protection. This created corrosion problems. The customer needed 3 year protection inside bogies on trains in operation. […]