Cortec-Middle-East-logo-notaglineCortec-Middle-East-logo-notaglineCortec-Middle-East-logo-notaglineCortec-Middle-East-logo-notagline
  • ABOUT US
    • VpCI® Technology
    • MCI® Technology
    • The Cortec® Story
    • Engineering and Field Service
    • Cortec® R&D
    • Asset Integrity Assurance
  • INDUSTRIES
    • Oil & Gas
      • Aboveground Storage Tanks
      • Equipment Preservation
      • Hydrotesting and Mothballing
      • Mothballing
      • Cased Pipeline Crossings
      • Rig Stacking
    • Manufacturing Industries
    • Construction
      • Reinforced Concrete Structures
      • Post-Tensioned Structures
      • Concrete Repair
    • Power & Water
      • Above-ground Storage Tanks
      • Equipment Preservation
      • Hydrotesting and Mothballing
      • Mothballing
      • Cased Pipeline Crossings
    • Aviation
  • PRODUCTS
    • All Purpose Lubricant
    • Surface Preparation
    • Rust Preventives
    • VpCI® Powder
    • VpCI® Additives
    • VpCI® Packaging
    • VpCI® Emitters
    • MCI® for Concrete
  • CONTACT US
Home  »  case studies   »   Automotive Parts Protection
Published by Cortec Middle East on June 12, 2024
Categories
  • case studies
Tags
  • Automotive Parts Protection
Automotive Parts Protection

Automotive Parts Protection

Automotive Parts Protection

Solving Delco Remy’s Production-Line Corrosion with a Three-Stage VpCI® Wash

Problem

Delco Remy manufactures various parts for the automotive industry. Their previous wash process relied on two cleaning products, but this combination wasn’t working. Parts experienced corrosion before even leaving the production facility. Given this ongoing issue, Delco Remy needed a way to prevent corrosion during the manufacturing process itself.

Background: Why In-Process Corrosion Threatens Automotive Parts Manufacturing

Automotive parts manufacturers rely on wash processes to clean components before assembly, packaging, or shipment. However, if the wash chemistry doesn’t provide adequate corrosion protection, parts can begin rusting immediately after cleaning. Sometimes this happens before they even leave the facility. This creates a frustrating cycle: the very process meant to prepare parts for the next production stage ends up introducing the corrosion problem it should prevent.

For high-volume manufacturers like Delco Remy, in-process corrosion isn’t just a quality issue. It also drives up rework costs, slows production throughput, and risks shipping compromised parts downstream. Solving this problem required a wash system that could clean effectively while actively protecting parts at every stage.

Application

Cortec® products received approval for use in Delco Remy’s three-stage wash process, with each stage serving a distinct purpose. In the first stage, the team used VpCI®-414 at a 5% concentrate, with S-16 added at 0.4% to control foaming during the wash cycle. The second stage used 100% water, providing a clean rinse between treatment stages. Finally, the third stage applied VpCI®-377 at a 10% concentration, delivering a final layer of corrosion protection before parts moved on in the production process.

Why VpCI®-414:
Used in the first wash stage, this product cleaned parts while simultaneously depositing a corrosion-inhibiting film. As a result, it addressed contamination removal and protection in a single step, rather than requiring separate treatments.

Why S-16:
Added specifically to control foaming, this defoaming agent kept the wash process running smoothly and efficiently. In turn, it prevented foam buildup from interfering with proper cleaning and coverage during the first stage.

Why VpCI®-377:
Applied in the final stage at 10% concentration, this product delivered the last layer of corrosion protection before parts exited the wash process, ensuring they stayed protected through subsequent handling and storage.

Conclusion

Delco Remy chose Cortec® products for two main reasons: their effectiveness against corrosion and their more environmentally friendly formulation compared to previous options. Cortec’s ISO 9001 and 14001 certifications also factored into the decision, reflecting confidence in Cortec’s quality and environmental management standards. Because the Cortec® system was new to Delco Remy’s process at the time of this case study, final long-term results weren’t yet available. However, based on testing completed three months prior, the parts should no longer experience corrosion problems.

Why This Case Matters for Automotive Parts Manufacturers

This project demonstrates how redesigning a wash process around corrosion-inhibiting chemistry can solve in-process corrosion issues that traditional cleaning products fail to address. For automotive manufacturers dealing with similar in-line corrosion challenges, this case highlights several practical lessons:

  • Multi-stage wash design allows targeted treatment — separating cleaning, rinsing, and protection into distinct stages ensures each step performs its specific function effectively.
  • Combining cleaning and corrosion protection saves processing steps — products like VpCI®-414 clean and protect simultaneously, rather than requiring a separate corrosion inhibitor application.
  • Certifications matter for manufacturing decisions — ISO 9001 and 14001 certifications gave Delco Remy added confidence in Cortec’s quality and environmental standards.
  • Pilot testing builds confidence before full rollout — three months of testing prior to full implementation gave Delco Remy evidence that the new system would resolve their corrosion issues.

Key Takeaways

  • In-process corrosion during manufacturing wash cycles can compromise parts before they even leave the facility.
  • A three-stage wash system allows targeted cleaning, rinsing, and protection at each distinct stage.
  • VpCI®-414 combines cleaning and corrosion inhibition in a single product, streamlining the wash process.
  • Defoaming agents like S-16 help maintain wash efficiency and consistent coverage.
  • Industry certifications, such as ISO 9001 and 14001, can influence manufacturer confidence in a new corrosion protection system.

Cortec Products Used

  • VpCI®-377
  • VpCI®-414
  • VpCI®-426
  • S-16
Contact Us
Share
0
Cortec Middle East

Related posts

High Rise Building Restoration

High Rise Building Restoration

September 23, 2025

High Rise Building Restoration


Read more
Protection of Electrical Cabinets

Protection of Electrical Cabinets

September 23, 2025

Protection of Electrical Cabinets


Read more
Cleaning and Preservation of Spare Parts

Cleaning and Preservation of Spare Parts

August 24, 2025

Cleaning and Preservation of Spare Parts


Read more

Comments are closed.

Cortec Middle East-logo

QUICK LINKS

  • → HOME
  • → ABOUT US
  • → INDUSTRIES
  • → PRODUCTS
  • → CAREER
  • → CONTACT US
  • → PRIVACY
  • → MEDIA

REQUEST A WEBINAR

REQUEST NOW

SOCIAL MEDIA

ADDRESS

CORTEC® MIDDLE EAST,
2411 Tower B, Jafza One,
Jebel Ali Freezone, DUBAI,
UNITED ARAB EMIRATES


TEL. +971 4 434 0669
FAX. +971 4 434 0668
INQUIRIES@CORTEC-ME.COM

Copyright Cortec® Middle East.
All rights reserved. Cortec®, MCI®, VpCI® 126-Blue®, EcoFilm®, EcoWorks®, Rawn® and Bull Frog® are registered trademarks of Cortec® Corporation.
    • No translations available for this page

      REQUEST A FREE SAMPLE



        Download Layup Manuals

          Select Manual* :


          Offshore Rig Layup PR




            Layup of Land Based Drilling Rigs PR




              Request a Quote


                Talk To Our Experts


                  Subscribe Now

                    Apply Now

                      Upload Your CV